REPLACE GUIDES
One
———--each —————-  18.00
    aluminum head -------------- 22.00
2-4
———— each ——————12.00
     aluminum head ----------------16.00
5 or more
-each ——————- 9.00
      aluminum head ---------------13.00


REPLACE SEATS
Set up & first seat
—————— 22.00
aluminum head ------------------
 30.00
Each additional seat ------------- 14.00
aluminum head
 -------------------18.00


HEAD RE-SURFACING
                             Cast Iron   Aluminum
4-cyl
                       60.00        60.00
Straight 6-cyl
          65.00        65.00
V-6 or V8 Pair
       
(up to .010)             75.00        95.00
Each additional
(.0050 per cyl)
         2.00          2.00
V-6 or V8


Intake or exhaust side priced per job Additional charge for extra set-up



MACHINE SHOP PRICE SCHEDULE  

Jan 2014


SuperFlow 902S
Computerized Dynamometer Capable of testing over 2,000 HP at 15,000 RPM


DYNO SERVICES

Minimum charge
  (up to 4 hours)   400.00
Hourly rate thereafter
                      75.00
Full day rate
                                  650.00

Time includes ARC personnel setting up the engine and removal of the engine from dyno, it does not  include ARC personnel working on engine during the session unless it is an engine that we have assembled.

ARC is notresponsible for damage  
incurred to engines while ran on dyno



SUPERFLOW     
SF-750 Computerized Flow Testing

The latest in flow testing technology

HINES
Computerized Engine Balancing
 
The high performance industry standard     

SUNNEN SV-10

Diamond Hone

SUNNEN VGS-20
Head Rebuilding Equipment   
For precise valve grinding, seat and guide installation

SUNNEN
Line Honing           
For true bearing alignment and clearance                               
           
SUNNEN
Rod reconditioning
For proper bearing crush and clearance     


BLOCK MACHINING
Pre-clean ——————————- 45.00
cam  bearings  & galley plugs)
Clean misc. parts ———————- H.R.
Pressure check V-8 block ——-- 89.00
Tap oil holes & install restrictors
SBC or BBC ————————— 36.50
Tap front galley holes ————  27.50
Clearance block for rods ———— H.R.
Install deck plugs ———————  H.R.
Resize block (up to .060) 4 cyl -150.00
                                    6 cyl —175.00
                                    8 cyl —200.00

Resize V-8 w/torque plates
                        Street ———— 240.00
Competition hone Race finish ——  300.00
Deck square to mains ————- 150.00
ea. add. .005 per cyl. —————-- 1.50
Install sleeve (labor) ————— 165.00
Install cam bearings —————-- 75.00
                       (hand fit extra)
Install galley plugs ——————- 33.00
Install freeze plugs, each ———— 3.00
Line hone) ————-- 250.00
Line hone damaged blocks ——— H.R.
Fill block w/HARDBLOK ———- 175.00
Sonic check block —————— 120.00


311 W Main StRockawayNew Jersey 07866, United States
ARC RACE Engines

(973) 477-5054

CRANKSHAFT SERVICES  
Clean                                              22.00
Chamfer oil holes
                           30.00
Magna flux
                                      40.00
Clean & polish
                            _  60.00
Grind - most
                                 175.00

ROD & PISTON  WORK
Clean rods - each
———————-  5.00
Remove & replace press fit
Each
———————————–——10.00
Remove & replace non stock
              
applications ————————–——-H.R.
Check big end - each
——————- 4.00
Check big end & hone to size
Each
————————————–-- 10.00
Re-condition rods
 
stock - each ————————–-24.00
using HP bolts - each
—————–- 28.00
Magnaflux rods - each
—————— 4.00
Pin-fit small end - each
—————- 8.50
Re-bush small end - ea
————— H.R.
Drill & chamfer oil holes
Each
—————————————- 5.00
Pin fit piston - each
——————— 8.50
Fly-cut reliefs, dome machining &
      
contouring ——————————— H.R

BALANCING SERVICES
Standard Passenger V-6 or V-8
   255.00  
4 cylinder                                       200.00
Straight 4 or 6 cylinder
                 137.00
Pistons
                                            HR
Rods
                                            HR
Flywheel or flexplate Plate
               68.00
Pressure plate (after flywheel is balanced) P.O.R.
Heavy Metal Installation Labor

                        Each 63.00 Welding and
Excess Metal Removal

                  per hour 75.00   

NEEDED FOR BALANCING
Crank, rods, pistons & pins, locks, rings,
bearings,flywheel and bolts,pressure plate
and bolts,Vibration damper and bolt.
      
All parts must be clean and unassembled
(pistons off rods and rings off pistons etc.)

Miscellaneous Cleaning Services
Clean iron intake and magnaflux
     50.00
Clean & glass bead
aluminum intake
                               60.00





HEAD WORK
4-CYLINDER

——— 32.00
Magnaflux
—————————- 18.00
Valve job
—————————— 150.00
     Overhead cam add. Hourly rate
           Overhead cam 4V ——120.00
Diesel 2V
—————-————-120.00
For non-adj. valves add
———--20.00
Straight 6-CYLINDER
Magnaflux
—————————- 25.00
Valve job
——————————110.00
Diesel
—————————------ 180.00
For non-adj. valves add
———-- 30.00
V-6 & V-8 cylinder
Magnaflux
—————————- 35.00
Valve job
—————————  135.00
Diesel
—————————--240.00
Perf. valve job
——————— 175.00
        (any non-stock cam)
For non-adj. valves add
———- 30.00
DISASSEMBLY AND ASSEMBLY
 @ HR

COMPETITION  
HEAD WORK
Disassemble race heads 
——— 40.00
Clean aluminum heads 
———— 60.00
Competition Multi-angle
valve job with carbide pilots
-- 250.00
Assemble & Set installed height 
  80.00
Back-cut valves ea.
——————- 4.00
Cut for teflon seals 
—————— 50.00
Cut for over-size springs
diameter only 
————————- 65.00
Machine for screw-in studs 
—— 165.00
             canted heads ———- 200.00
Install bronze guides & wet hone
to size 
——————————— 220.00
Machine for oversize valves 
--180.00
Drill steam holes SBC 
— iron — 55.00
Drill steam holes 
— aluminum 94.00
Pin rocker studs w/pins 
———   75.00

COMPETITION ENGINE SERVICES
File-fit rings 
                                   75.00
Blueprinting 
                                  P.O.R.
Side clearance rods 
                     P.O.R.
Degree cam 
                        per hour 75.00
C.C. heads 
                          per hour 60.00
Custom engine assembly 
             P.O.R.  
Check bearing clearances     min 150.00


FLOW  TESTING & PORTING   
First  hour                                        75.00  
Each additional hour                        75.00

​​